(Русский) Замена дисплея на смартфоне Huawei Honor 6C Pro

, , 2 Comments

Today I decided to write an article about my experience of replacing the display with Honor 6C Pro. It changes as standard, but there are nuances. Masters will understand. Well, for those who decided to change the display module for Honor 6C Pro with their own hands, this article will be useful.

First, Unscrew the two bolts (stars). Screwdriver from under the Iphone did not fit. Or the bolts were lapped or another screwdriver was needed. In General, I sharpened the screwdriver from under the iPhone and everything came up.

width=

 

Memorable pull the SIM tray out.

Pry the back cover from the bottom up.


Remember to connect and test the new display. Check how the touchscreen works ( for this go to settings, click “about device”, several times on the”build number”. Potov go to” developer options”, there choose” show pressing ” and check the sensor.)

after warming up, pry the display. For starters it is better to use something sharp.


Remove the old tape, degrease the frame. Glue tape 3M and loyalty between the Scotch coat of glue B5000.
Install the module and press it for 40-50 minutes. Then you remove the pins, remove the excess adhesive and the device is ready. I hope this article will help someone. All thanks. Vidio this procedure will be a little later.

Here’s the video:

Buy spare parts here :
http://s.click.aliexpress.com/e/60iJWm8 ahhh!

 

2 Responses

  1. Rais

    January 11, 2019 11:37 am

    Здравствуйте,а возможно ли заменить сенсор (верхнее стекло) или надо полностью менять модуль? Просто я видел на Али продаются просто сенсоры со шлейфом и стоят 400руб.

    Reply

Leave a Reply